▪️ NEB Basic is a compact medical device designed to efficiently deliver physician prescribed medication to the bronchial lung passages for the treatment of asthma, allergies, COPD and other respiratory ailments.
▪️ This product is intented for use with a single adult, pediatric or infant patient.
——————————————
HOW IT WORKS
▪️ This product creates a stream of air that travels through a clear tube to the nebulizer. When air enters the nebulizer, it will convert the prescribed medication into aerosol mist for easy inhalation.
——————————————
HOW TO USE
▪️ Step 1: Place the Compressor Nebulizer on a flat and stable surface. Be sure that you can easily reach the controls when you are seated.
▪️ Step 2: Gently twist the top part of the nebulizer counter-clockwise to disassemble the nebulizer.
▪️ Step 3: Fill the bottom section of the nebulizer with the medication prescribed by your physician. Be sure that the cone is put inside the bottom section.
▪️ Step 4: Gently twist the top part clockwise to reassemble the nebulizer. Be sure the two sections fit well.
▪️ Step 5: Attach one end of air tube to the base of the nebulizer.
▪️ Step 6: Attach the other end of air tube to the air tube connector located on the front of the compressor.
▪️ Step 7: Attach the interface accessory of your choice to the top section of nebulizer.
▪️ Step 8: Plug the power cord into an appropriate electrical outlet. Make sure at this stage, the power switch is at “OFF” status.
▪️ Step 9: Press the power switch to “ON” status to begin your prescribed treatment.
▪️ Step 10: Rotate the intake air valve to increase or decrease of the medicine vapour output.
▪️ Step 11: When treatment is finished, shut off the unit and unplug it from the electrical outlet.
Note: The compressor motor has a thermal protector which will shut off the unit before the unit is overheated. When the thermal protector shuts the unit off, please:
– Switch off the unit.
– Unplug the unit from the electrical outlet.
– Wait 30 minutes for the motor to cool down before another treatment.
– Make sure the air openings are not obstructed.
——————————————
SPECIFICATIONS
▪️ Power: 220V/50Hz.
▪️ Power consumption: 180VA.
▪️ Medication capacity: 6ml.
▪️ Particle size: 0.5 – 10μm.
▪️ MMAD: 4μm.
▪️ Sound level: Around 60dBA.
▪️ Average nebulization rate: 0.34ml/min.
▪️ Liter flow range: 3 – 10 lmp.
▪️ Weight: ≈ 1.7kg.
▪️ Standard accessories: Compressor, Air tube, Filters, Neb cup, Mouth piece, Nose piece, Child mask, Adult mask, Instruction booklet, Warranty card.
Đánh giá
Chưa có đánh giá nào.